Armstrong Satinkeeper Low Gloss Floor Finish 32oz

Description

Restore gloss and protects the finish of Armstrong low gloss and ultra low gloss no-wax vinyl and linoleum floors that have lost their original shine. Use Armstrong Satinkeeper Low Gloss Floor Finish in a 32 ounce bottle. Renews the appearance of worn or dulled flors Protects floor from scuffs, scratches and dirt Does not require buffing Ready-to-use formula Finish stays shiny after repeated washings For Use On: Vinyl & Ceramic; Linoleum Not for use on high gloss vinyl floors. Directions For Initial Use: Sweep or Vacuum floor thoroughly. Wash with Armstrong Once ‘n Done Floor Cleaner (not recommended for linoleum floors) Allow floor to dry. Apply a thin coat of Satinkeeper with a clean damp sponge mop or microfiber applicator mop. Coat entire surface. Allow floor to dry (approximately 30 minutes). Directions for Ongoing Use: Reappy Satinkeeper as needed to maintain shine. Only apply 1 – 2 coats at a time. If necessary, remove with Armstrong Floor Stripper & Cleaner (not recommended for linoleum floors) Note: In high humidity areas, Satinkeeper may take longer than 30 minutes to dry. Coverage: 1 Coat: 375 – 500 sq ft per quart. ; 2 Coats: 187 – 250 sq ft per quart Safety Data: Armstrong Satinkeeper Safety Data Sheet,floor cleaner,wood floor cleaner ,vinyl cleaner,brand,carpet cleaner,stone and tile cleaner ,floor machines,installation tools, floor care