Description
- ⚡【ADJUST SENSITIVITY TO LOWEST SETTING】Befor you test,Please adjust sensitivity of the ac circuit breaker finder to lowest setting.Or it beeps at nearly every breaker!!!At the lowest setting, the receiver will beep immediately when you approach correct breaker, then you can adjust to higher sensitivity to find correct breaker.
- ⚡【AC 90-120V CIRCUIT BREAKER FINDER】Identifies circuit breakers on energized 120V electrical systems, breaker detector finder compatible with standard 90 to 120V AC 50/60Hz breaker system.
- ⚡【GFCI TESTER】A transmitter connected to the electrical outlet or fixture, and a receiver used to scan the panel to locate the correct breaker. The ac circuit finder tracer has the GFCI security test function and is easy to use.
- ⚡【LED STATUS INDICATOR】 The LED indicator panel on the transmitter of breaker finder electric tester can inform the test status and avoid wrong operation.
- ⚡【HOW TO USE】 First of all, insert the transmitter into the socket you are looking for, before look at the right switch, please minimize the sensitivity, and slowly move the receiver near the breaker box. When the receiver emits the sound of Di Di Di and the indicator light is flashing, it means that you have found the corresponding control switch, and then slowly increase the sensitivity to confirm, it will make a more obvious alarm sound.
| Power Source | Corded Electric |
|---|---|
| Minimum Operating Voltage | 90 volts_of_alternating_current |
| Measurement Type | Electrical Signal Sensitivity |
| Compatible Devices | Electrical outlets or fixtures, electrical panels with 90 to 120V AC 50/60Hz breaker systems |
| Style Name | UT25A |
| Color | Red |
| Item Weight | 220 g |
| Item Dimensions | 7.87 x 4.96 x 1.97 inches |
| Specification Met | Beep,beeps |
| Model | 2 |
| Unit Count | 1 Count |
| Manufacturer | UNI-T |
| Included Components | AC Circuit Breaker Finder |
| Part Number | 2 |
| Power Source Type | Corded Electric |
| Style | UT25A |
aplus content video
-
How should I adjust the sensitivity?
Adjust the sensitivity of the receiver to the minimum and keep slowly turning it up during the measurement until it can be accurately located to the break.
-
Does the power have to be on for the tester to work?
Yes, it must be powered on to test the circuit break, the receiver also needs to use a 9V battery to receive the signal, but we come with the package with a 9V battery.
-
The receiver just beeps at all the breakers. What should i do?
Turn down the sensitivity before using it, otherwise it will beep at any break until it is adjusted to a critical point, this critical point needs to be found by you, try it a few more times and you will find break.
-
Will it work if there is no electricity to the socket?
No, it will not work without electricity. The socket must be connected to 90-120V mains to power the transmitter inserted into the socket.
Reviews
There are no reviews yet.