EZAccessory 4 Wheel Adapters 5 Lug 5.5″ to 5 Lug 4.75″ Thickness 1.25 Inch

Description

【Fit Vehicle】Fit vehicles of 5×5.5″ or 5×139.7mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels.【Convert Wheel】Convert to wheel must be 5×4.75″ or 5×120.7mm bolt pattern.【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs with mounting lug nuts included.【Adapter Specs】4 pieces total; 5×5.5″ or 5×139.7mm bolt pattern for vehicle; 5×4.75″ or 5×120.7mm bolt pattern for wheel; 1/2″ studs; thickness 1.25″ (32mm); 87.1mm center bore【Attention】Adapters will give you widened stance as well as stability. If vehicle studs protrude outside the adapters, you may need to shave down vechile studs.

Product Information:

The wheel adapter set is used to convert 5 lug 5.5-inch (139.7mm) hub bolt pattern to fit 5 lug 4.75-inch (120.65mm) bolt pattern wheels. They will also space out your wheels for 1.25-inch to help you get enough clearance for wider tires and rims. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed and 1/2″-20 thread size mounting open end lug nuts are included. This is a set of 4 adapters for all 4 wheels. Fit on Following Vehicles:

Fits Dodge Ramcharger 1979-1983 Fits Dodge Ram 1/2 Ton 2&4 WD 1994-2001 Fits Dodge Ram 1/2 & 3/4 Ton Truck 1979-1993 Fits Dodge Ram Van 1985-1996 Fits Ford Bronco 1966-on Fits Ford F 1/2 Ton, F-100, F-150 1954-1996 Fits Ford 1/2 Ton E-100, 150 Van 1970-1996

Adapter Specification:

Vehicle Bolt Pattern: 5×5.5″ (5×139.7mm) Wheel Bolt Pattern: 5×4.75″ (5×120.65mm) Studs Thread Size: 1/2″-20 Hub Bore Size: 87mm Thickness: 1.25-inch (32mm) Torque: 85 ft-lbs

Technical Notes:

If hub studs protrude outside adapter and prevent wheels from sitting flush, it is required to shorten the factory studs.