Description
The HC6R LED retrofit downlight kit is designed to be installed into 6.625″ (6-5/8″) to 7.0″ (7-0″) nominal ceiling cutout aperture commercialhousings (Non – Halo Commercial). The HC6R reflector offers a medium distribution ideal for general area lighting. Lumen options range from 1000 to 4000 lumens in color temperatures of 2700K, 3000K, 3500K, and 4000K; in 80 or 90CRI. Installs from below the ceiling into existing open frame recessed commercial housings. Intended for office spaces, healthcare, hospitality, and institutional applications. – PRODUCT SPECIFICATIONSRetrofit Frame / Collar – Galvanized steel collar accommodates open frame housing openings from 6.625 (6-5/8″) to 7.0″ (7-0″) nominal ceiling cutout aperture, 2″ thick and installs with (2) remodel spring clips installed from below the ceiling. – Junction Box – Provided with armored cables providing flexible connections to the LED module and existing junction box for mains voltage connections. – Galvanized steel junction bo 20in3 internal volume excluding voltage barrier25 in3 internal total volume – Voltage divider for 0-10V dimming wires [occupies (1) 1/2″ pry-out space]Listed for (8) #12 AWG (four in, four out) 90 degree C conductors and feed-thru branch wiring(3) 1/2″ and (2) 3/4″ trade size pryouts availabl (3) 4-port push wire nuts for mains voltage, with 1-port for fixture connectionDriverField replaceable constant current driver provides low noise operation – UNV 120-277VAC 50/60Hz input standard347VAC 50/60Hz input option (Canada only)Continuous, 1%-100% dimming with 0 -10V analog control – Emergency Option – Provides 90 minutes of standby lighting meeting most life safety codes for egress lighting – Available with remote charge indicator and test switch – Available Self-Test (self-diagnostic), with remote charge indicator and test switch – Connected Lighting OptionsWaveLinx – two options – Factory installed Wave – Linx tile mount sensor kit – Field installed Wave – Linx accessory tile mount sensor kit – The WTA Wave – Linx tile mount sensor kit offers daylight dimming, PIR motion sensing control, and optional RLTS – Real Time Location Services. (Refer to Wave – Linx system specifications.) The WTA Wave – Linx kit includes control module that mounts on the luminaire electrical junction box via 1/2″ knock-out, and tilemount sensor with direct-mount spring clips or for octagon ceiling box with included mounting bracket. (Field mount kit ordered and installed separately)Enlighted wireless tile mount sensor and control kitCompliancecULus Listed/Classified, wet location labeled for covered ceiling – IP20 – Above finished ceiling; IP65 – Below finished ceiling – Non-IC rated 2000, 3000, 4000 lumen models. Insulation must be kept 3″ from top and sides – IC rated 1000, 1500, lumen models are suitable for direct contact with air permeable insulation (also suitable for Non-IC)Not for use in direct contact with spray foam insulation, consult NEMA LSD57-201Airtight per ASTM-E283-0Suitable for use in clothes closets when installed in accordance with NEC 410.16 spacing requirement – EMI/RFI emissions FCC CFR Title 47 Part 15 Class A at 120/27Contains no mercury or lead and Ro – H
Reviews
There are no reviews yet.