Description
- Care instructions: This product contains chemicals known to the state of California to cause cancer
| Manufacturer Part Number | AH-C5B |
|---|---|
| Unit Count | 1 Count |
| OEM Equivalent Part Number | AH-C5B |
| Manufacturer | HornBlasters |
| UPC | 787854807367 854916005266 |
| Global Trade Identification Number | 00854916005266 |
| Item Weight | 19.8 pounds |
| Model Number | AH-C5B |
| Voltage | 12 volts |
| Fit Type | Universal Fit |
| Compatible with Vehicle Type | Truck, Van, Bus, UTV, Tractor |
| Noise Level | 113 db |
| Automotive Fit Type | Universal Fit |
| Material Type | Metal |
| Item Dimensions | 17.5 x 15.5 x 15.5 inches |
| Color | Regular |
| Style Name | Classic |
| Material | Metal |
If you are wanting a huge metal train horn, but don’t have the budget for the authentic train horns that can cost a fortune, look no further. With five big beautiful black bells on a black manifold, our Katrina Train Horn is sure to turn heads not only with its stunning good looks but with its massive sound as well. With what can only be described as a wall of sound, this five chime metal horn has a classic train horn tone that is rich and full. If you like your train horns big and bold, our Katrina Train Horn is the horn for you!
5-Chime Construction
This 5-chime setup allows for a unique combination of notes to create that train horn tone we all know and love. Each bell is loaded with 3.5″ stainless steel diaphragms. This means the diaphragms will never rust out and this horn will last for years to come.
Each bell plays it’s own individual tone. When these are combined the sound you get is a train horn chord.
Stainless Steel Diaphragms
We utilize stainless steel diaphragms in nearly all of our horns. Meant to withstand years of use, these are the best choice for our air horns. You’ll always be ready to honk with our Katrina. These diaphragms will never rust out.
Pre-installed Solenoid Valve
This horn features a pre-installed solenoid valve.
This makes your install even easier as this horn is ready to accept 1/2″ air line.
Just wire your solenoid to an activation switch and ground. Couldn’t be easier!
Deep Tone
This horn was designed with a large throat for a deep tone. These horn bells are significantly bigger than most others. This allows the horn to have a much deeper tone without becoming too large.
Manifold Design
This horn features an L-bracket for easy install.
This can be mounted directly to the vehicle with the provided hardware to make your install seamless.
No fabrication required!
Stainless Steel Diaphragms
Solenoid Valve
Large Throat
L-Bracket for Easy Install
Katrina Specifications + Details
Size and Weight Specifications
Size / Weight
- 19.5″ Long
- 19.75″ Wide
- 13.5″ Tall
- Weight: 30 Lbs.
Fully Rebuildable
Not only are these horns incredibly loud, but they are also serviceable. If you end up with a bunch of road debris or dirt in your horn, we offer a rebuild kit for these horns.
The solenoid valve is also replaceable as well should anything ever happen to it.
The horn bells themselves cannot be removed from the manifold.
Onboard Air System Requirements
Recommended Air System
This horn is not picky about the air you supply to it. We have found that this horn will still sound off with just 50 PSI! We recommend running 150 PSI to these horns, as we have found that they sound their best and are their loudest @ 150 PSI. You can expect up to 5-7 Seconds of honk time with a 2-gallon tank at 150 PSI. 1/2″ Air line is recommended. Any smaller and the airflow will be limited.
Mounting this horn
This horn can be mounted nearly anywhere on your vehicle. You can even mount it to the roof!
We typically see these installed on trucks in the spare tire location. This allows you to tuck the horn up under the truck without it hanging down too low.
Additionally, it may be a good idea to angle it to either the drivers or passengers side of the vehicle. This helps prevent any road debris from getting into the horn and clogging up the internals.
Reviews
There are no reviews yet.